Hunan EEXI Technology&Service Co., Ltd.
Together, we make happiness！
Add to Cart
Odorless Low Respiratory Resistance KN95 Respiration Face Mask
Feature
Anti coronavirus, anti dust and virus.
Dispsoable Great elasticity face mask
Non woven face mask is made of spunbonded non woven fabric and meltblown non woven fabric
Low respiratory resistance, no odor, no irritation.
Use ultrasonic welding technology, comfortable wearing, breathable, hygienic, and biodegradable.
[Product Scope and Use] It is suitable to protect the dust, smoke and mist that are produced by mechanical force at a concentration below 10 times the occupational demand limit and produce harmful volatile gases.
[Product performance] The appearance of the mask should be neat and intact, and the surface should not be damaged or stained: the four sides of the mask should be pressed flat and dense. There must be no leakage: the connection strength at the connection point between each mask band and the mask body should not be less than 10N; the mask band should be easy to wear and wear; the particle filtration efficiency (PFE) of the mask should be ≥95%.
| Product Name | KN95 particulate respirator face mask(Non-medical) |
| Standard Applied: | GB2626-2006 |
| Color | White |
| Size | 15.5*10.7cm (customizable) |
| Material quality | PP non-woven fabric, melt-blown filter fabric, hot air non-woven fabric, mask belt, nose clip |
| Scope of application | Medical, food, electronic and other fields. |
| Shelf life | 3 Years |
| Storage method |
1. The unopened products should be stored in the range of 20 degrees Celsius to 30 degrees Celsius, and the relative humidity should be ≤80%: no corrosive gas and well ventilated environment. 2. The product should not be squeezed too much during transportation to avoid damage to the package; Avoid from direct sunlight, rain and snow.
|
Precautions,warnings and information
1. Check whether the packaging is intact before use, and confirm the external packaging mark, production date, and validity period, and use it within the validity period.
2. Cannot be used for painting and sandblasting operations, and cannot protect against harmful gases and vapors. This mask does not generate oxygen, cannot Use in an environment with an oxygen concentration below 19.5%. Do not use in an environment with oil mist.
3. Before using this protective mask, the wearer should first receive training and suitability testing for proper use.
4. When the concentration of pollutants reaches the concentration immediately threatening life or health. Do not use this protective mask.
5. When you feel difficulty breathing, dizziness or other discomfort: you should leave the contaminated area immediately.
6. When the product is damaged and the respiratory resistance becomes too large, a new mask should be replaced.
7. Check the protective mask before each use to ensure it is in good working condition. Check all parts of the protective mask, including two ear straps and nose clips, for signs of damage.
8. Do not modify, clean, abuse or misuse this protective mask.
9. If the beard, facial hair or other facial features prevent the face from getting close to the edge of the mouth camp, this protective mask should not be used.
10. Be sure to read the instructions and restrictions and precautions carefully before use. Improper use will reduce the effectiveness of the protective mask, and may cause disease or permanent damage to health.
11. After the product is used, please handle it according to the requirements of the environmental protection department or relevant units. Warning] This product is only used for respiratory protection against certain particulate matter; the maximum use temperature is: 50C; incorrect use can cause illness or even death. For the correct method of use, please refer to the information provided by the manufacturer on the box, please ask your supervisor or call the hotline: 4000 333 -088.